Henan Jinzhen Boiler Co., Ltd.
Jinzhen Boiler, warm you every moment!
Add to Cart
85% Oil Rate Waste Engine Oil Recycle To Diesel Distillation Refining Plant
With the distillation machine can recycle waste tire pyrolysis oil, waste plastic pyrolysis oil, waste engine oil, waste lubricant oil and oil sludge into diesel.
Input capacity: 5ton-30ton
Output capacity per day: 3ton-10ton
Fuel for heating: coal / wood / natural gas / distillate oil
Installation cover area: 300-400 square meters
Workers: need 2-3 workers for machine operation
This Waste Engine Oil Distillation Machine will need one-time catalyst which is produced by our company only, there is no need to buy from other catalyst factory as we have the catalyst formula .it is customized.
The pyrolysis oil with black color after distillation and remove color and smell , we will get synthetic diesel oil with yellow color,which can be used for diesel engines like trucks , tractors , ships etc.
| No. | End Production | Yield | Usage |
| 1 | Diesel | 73% | Used for diesel engine |
| 2 | Gasoline | 12% | Used for gasoline engine |
| 3 | Residue Oil | 9% | * Feeding into Pyrolysis Machine for second Pyrolysis * Sold directly for building road |
| 4 | Non-Condensible Gas | 3% | Recycle as Heating fuel after treated by Gas-treatment System |
| 5 | Other | 3% | * Water and impurity 2% * Loss 1% |
Technical Specification
Working process of waste engine oil distillation machine
Distillation plant works as follows:
1. Pump waste oil into distillation reactor by oil pump.
2. Heat the reactor, and the liquid oil will slowly become oil gas, oil gas will go through catalytic chamber and condenser,
then diesel will be cooled out first by controlling the temperature over 150 Celsius degrees.
3.The gasoline will be cooled out when the temperature is below 150 Celsius degrees, the rest of the system is same as pyrolysis system.
The main list of waste oil distillation equipment
A. Vertical reactor/Horizontal reactor
B. Reducer system
C. Condensation system
D. Collector
E. Oil collecting tank
F. Residue tank
G. Oil-gas separator
H. Water cooling system
I. Water seal
J. Pressure & Temperature monitoring gauge
K. Deodorization system
L. Efficient anti clog cooling system
M. Gas heating system (waste gas process system)
N. Smoke desulphurization and dust removal system
Advantage of used engine oil to diesel recycling distillation plant
Safety
Safety is the most important factor in the whole process. We had successfully researched some safety devices which ensure used engine oil to diesel recycling distillation plant work safely.
1. Safety valves, alarming device and the pressure gauge etc.
2. We also have oil-water separator which can stop the oil gas recycle to the reactor, which could avoid the accident.
3. High degree of automation: feed the waste oil, crude oil automatically, to pump oil automatically.
Energy saving
1. Well sealing for heating system, no gas leak and saving fuel.
2. Continuous feeding with automatic feeder, no gas leak.
3. Recycling of exhaust gas and scientific fire channel design can save energy and thereby reducing costs.
Environmental friendly
1. The whole process is all sealed, won't release any gas harmful to human and environment.
2. Well water dedusting system can avoid black smoke.
After-sales service
1.Engineers with over ten years’ waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.
3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
FAQ of waste engine oil distillation machine
1. Who has run the waste tire/plastic to oil recycling pyrolysis machines?
A: The waste tire/plastic to fuel recycling pyrolysis machines have been installed in 25 countries all over the world.
2. What can I get from the machines?
A: From 10T pyrolysis machine, you can get 4-5T tire oil or 2T-7.5T plastic oil, 2.5-3T carbon black, 1.5-2T steel wire, 5%-10% syngas.
3. How much profit do I get from the pyrolysis machine? What's in it for me?
A: This machine can get you hundreds to over 1,000USD profit gross profit per day.
The accurate profit varies with your local raw material cost, amount and your output selling price. If you provide these prices, we can give you a specific profit analysis report.
By the way, the more tyre/plastic you process per day, the lower the average management cost and the more profit you get.
4. What matter most to this waste tire/plastic to oil recycling pyrolysis business?
A: Safety. It's the most important thing in this high-profit oil gas business.
Environment friendly
Energy-saving
Installation&worker training
Technical support&update
Service
Successful Case