10ton 10T Used Tire Recycling Machine Waste Tyre To Fuel Oil Pyrolysis Plant

10ton 10T Used Tire Recycling Machine Waste Tyre To Fuel Oil Pyrolysis Plant​

Used tire pyrolysis oil to diesel plant is a new type of tyre oil treatment machine researched by our company through many times of experiment combined with the actual situation. The whole treating process is going under low temperature. It can effectively remove the tiny particles and Colloidal matter in the tyre oil, and meanwhile it can remove the odour of the oil, and finally makes the oil color looks clean and transparent and improve the economic value. It features high recycling rate, low costs of energy consumption, good oil processing ability. It is suitable for purification of tyre pyrolysis oil.

Technical Specification

Technical Advantage

a) Safety
1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or negative pressure.
3) Temperature monitoring device to avoid excessive working temperature.
4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid catching fire.

b) Environmental protection
1) The flue gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.
2) The procedure to remove carbon black is working under closed situation to avoid pollution.

c) High oil yield
1) We have 3 steps for cooling system: one condenser pipe, two large horizontal condensers and two vertical condensers. The oil gas pass through 3 steps cooling system in sequence. The total cooling area is 65 square meter.
2) When the oil gas pass through the condensers, it’s divided into several portions by small pipes inside condenser and be cooled separately.
3) In this way we maximize the cooling effect and improve the oil yield.

Material for waste tyre pyrolysis plant

1.Waste rubber tire, waste plastic, waste rubber products, etc.
2.Industrial mixed waste plastic, allowing dozens of waste existing at the same time (such as PP, PE, PVC mix together etc).
3.Waste oil:waste diesel, lube oil, engine oil, waste oil residue, mazut, tar oil, wax oil, waste crude oil etc.

End product of waste tyre pyrolysis plant

Philippines Market Profit analysis report , please contact with us to get your profit analysis report.