Henan Jinzhen Boiler Co., Ltd.
Jinzhen Boiler, warm you every moment!
Add to Cart
1ton 70hp 1000kg Industrial Low Pressure Natural Gas Steam Boiler Price
Model:WNS Type steam boiler
Structure:Wet Back Fire Tube Three Pass
Rated Steam Capacity:1-25 ton/hr
Rated Steam Pressure:0.7/1.0/1.25/1.6/2.5 Mpa
Rated Steam Temperature:170/184/194/204/225 C
Application:Textile Mill,Food and Beverage,Chemical,Medicine,Light Industry,Rubber,Printing and Dyeing Plant,Paper Mill,Wood Processing,Garment and Laundry etc.
WNS series oil and gas steam boiler adopts shell type full wet back type fire tube structure. The structure adopts three return journeys, in which the oil or gas is well atomized by the burner and fully mixed with the air, and is completely burned in the corrugated furnace bile, and then turns from the rear smoke chamber into the return smoke pipe, turns to the front smoke box into the return smoke pipe, enters the back smoke box, and is discharged by the chimney.The size of the furnace liner we choose is large, which provides conditions for the full combustion of fuel, so this packaged steam boiler can burn heavy oil, light oil, natural gas and city gas. In addition, our company adopts threaded smoke pipe in the design, and the relative flow rate can control low smoke resistance, low power consumption and large load regulation ratio under the guarantee of sufficient heat transfer.
Boiler Features:
1. The design, production, supervision and inspection of boilers are strictly in accordance with the Safety Supervision Regulations for Steam Boilers, JB/T 10094-2002 General Technical Conditions for Industrial Boilers, and JB/T 1619-2002 Technical Conditions for Boiler Body Manufacturing, so as to ensure long-term safety and stability of boilers.
2, the body for the pot shell type full wet back downstream three return firework tube structure, the flame in the large combustion chamber micro positive pressure combustion, complete extension, low burning heat load, less NOx emission of harmful substances.
3, corrugated furnace and threaded pipe structure, that is, to improve the strength, but also to meet the needs of the heat expansion of each part.
4. Butt joint is adopted in the welding of the main welding seam, and non-destructive inspection is conducted by X-ray and ultrasonic to ensure that the welding quality meets the national requirements.
5, the boiler water volume and gas space is large, strong capacity to adapt to the load.Reasonable design of boiler installation, to ensure that the steam water rate is less than 4%, to meet the higher requirements of users on the quality of steam.
6, the use of new heat insulation material, light weight, less heat loss, good insulation performance.
7. The water level alarm adopts stainless steel as electrode rod and teflon as insulation material.Inserted from the top, not easy to hang dirt, reliable performance, long service life.
8. The front and rear smoke boxes are connected by hinges, which can be easily opened, convenient for maintenance and maintenance.
SAFETY FEATURES
Real-time monitoring of water level: Electronic water-level detecting device
Water shortage protection: The combustion control system power will be cut off when there is water shortage along with alarm.
Leakage protection: The power will be cut off when there is leakage detected by the control system.
Over pressure protection: When the pressure is over the preset value, the combustion control system power will be cut off along with alarm.
Steam Safety Valve automatically opens to reduce pressure should excessive steam cause pressure build-up.
Steam Pressure Gauge allows visual observation of steam pressure over full range.
Manual Reset Pressure Control provides high limit pressure cut-out with manual reset.
Complete gas manifolds and protection system for gas boiler: Strainer, pressure regulating valve and magnetic valve
Flue gas monitoring device can detect the flue gas temperature automatically.
Technical Parameter
| Boiler Model | WNS0.5 | WNS1 | WNS2 | WNS3 | WNS4 | WNS6 | WNS8 | WNS10 | WNS15 | WNS20 | |
| Rated steam capacity(T/H) | 0.5 | 1 | 2 | 3 | 4 | 6 | 8 | 10 | 15 | 20 | |
| Rated steam pressure(Mpa) | 1.0/1.25/1.6/2.5 | ||||||||||
| Rated steam temperature(℃) | 184/194/204/226 | ||||||||||
| Feed water temperature(℃) | 20/104 | ||||||||||
| Thermal efficiency(%) | >98 | ||||||||||
| Nox emission(mg/m3) | 120/80/30 | ||||||||||
| Exhaust gas temperature(℃) | <60 | ||||||||||
| Fuel type | Light diesel oil/Heavy oil/Natural gas/Liquefied gas/City gas | ||||||||||
| Fuel consumption | Light diesel oil(kg/h) | 32.5 | 64.6 | 129.3 | 192.9 | 258.2 | 388.6 | 514.6 | 641.7 | 960.1 | 1276.2 |
| Natural gas(Nm3/h) | 35.7 | 70.1 | 140.3 | 212.1 | 283.4 | 424.2 | 566.3 | 707.8 | 1061.7 | 1415.8 | |
| Max transportation weight(t) | 3.5 | 5.5 | 8.0 | 10.7 | 11.6 | 17.5 | 22.5 | 26.8 | 35.2 | 45.5 | |
Executive Standard
1. Design, manufacture, assembly, experiment and acceptance of boilers in strict accordance with national and industrial standards, including but not limited to the following standards: GB/T16508 Boiler Shell Boiler, TSG G0001 Boiler Safety Design Supervision Code, GB50273 Boiler Installation Engineering Construction and Acceptance Code
2. The main steel used in the boiler is 20 GB/T3087, which ensures the safety and reliability of the boiler.
3. Welding materials shall be selected according to NB/T47018. Full penetration welding with argon protection shall be performed on the boiler tube.
Boiler picture
This steam boiler is widely used in different industries such as chemical plant, energy field, food factory, hospital, hotel, laundry, package plant, paper-making mill, pharmaceutical factory, slaughter house, tobacco factory, textiles plant, etc.
