
Add to Cart
100,000-1,000,000 Kcal/H Thermal Oil Boiler, Hot Oil Boiler Used For Asphalt Equipment Machine
This thermal oil boiler takes heat carries oil as medium and uses the hot oil circulating pump force the medium to make liquid circluation ,then the thermal energy will be transmitted to the devices and back to furnace to be reheated. so the boiler can get higher working temperature at low pressure ,and make a better usage of heat , it is a kind of safe boiler with high efficiency and low power consumption this series boiler have advinced program control system, equiped with liquid level controller,pressure controller ,temperature controller ,and alarms to make sure the boiler work orderly and safe.so it is a kind of safe boiler with high efficiency and low power consumption .
Model | YYW/YQW |
Rated Thermal Power | 120-10000 KW |
Design Pressure | 1.1 Mpa |
Working Pressure | 0.8 Mpa |
Medium Outlet Temperature | ≤350 C |
Fuel | Light Oil,Heavy Oil,Natural Gas,Lpg,Lng,Cng,Diesel etc |
Application | Chemical,Oil,Petrochemical,Textile,Printing,Rubber,Carton,Plywood,Asphalt,Cement, etc |
Free-Assembly
Portable System
Three Fire-Passes
New Wet-Back Design
Corrugated Furnace, Fire-tube
Automatic Ignition Burner
Accurate Oil-Temp. Control ±1℃
Automatic Oil Replenishment
Automatic Over-pressure Protection
Automatic Over-temp. Protection
Automatic PLC ON/OFF
Visible Oil Temperature
Visible Working Pressure
Visible Exhaust-gas Temperature
Adjustable Oil Temp. ≤310℃
This thermal oil boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a convection heating surface.Fuel burn fully in the combustion chamber, the radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.
Technical parameters
Item Model | Rated Power | Design Pressure | Medium Outlet | Heating Area (M2) | Fuel Consumption | Furnace Oil Content (M3) | Boiler Dimensions (m) | Transport Weight | |
Light Oil (kg/h) | Natural Gas (Nm3/h) | ||||||||
YY(Q)W-120 | 120 | 1.1 | ≤350 | 9.8 | 12 | 15 | 0.1 | 1.6x1.0x1.5 | 1.5 |
YY(Q)W-240 | 240 | 14.5 | 25 | 30 | 0.15 | 1.9x1.2x1.8 | 2 | ||
YY(Q)W-350 | 350 | 21.3 | 37 | 44 | 0.25 | 2.1x1.3x2.0 | 2.58 | ||
YY(Q)W-500 | 500 | 24 | 52 | 63 | 0.3 | 2.2x1.3x2.0 | 3 | ||
YY(Q)W-700 | 700 | 40 | 69 | 83 | 0.5 | 3.2x1.4x2.2 | 3.7 | ||
YY(Q)W-1000 | 1000 | 50 | 100 | 120 | 0.8 | 3.3x1.6x2.4 | 5 | ||
YY(Q)W-1200 | 1200 | 64.6 | 120 | 145 | 0.85 | 3.8x1.7x2.5 | 5.8 | ||
YY(Q)W-1400 | 1400 | 78.5 | 140 | 170 | 1.1 | 4.1x1.9x2.7 | 6.7 | ||
YY(Q)W-1800 | 1800 | 87 | 180 | 220 | 1.2 | 4.6x2.0x3.0 | 7.8 | ||
YY(Q)W-2100 | 2100 | 94.5 | 210 | 260 | 1.7 | 5.0x2.0x3.0 | 8.8 | ||
YY(Q)W-2400 | 2400 | 106.2 | 244 | 296 | 1.9 | 5.0x2.2x3.1 | 9.8 | ||
YY(Q)W-3000 | 3000 | 163 | 300 | 365 | 3.5 | 5.9x2.4x3.4 | 15.5 | ||
YY(Q)W-3500 | 3500 | 205.2 | 350 | 425 | 3.8 | 6.5x2.4x3.6 | 17.8 | ||
YY(Q)W-4700 | 4700 | 254.3 | 470 | 570 | 4.2 | 7.2x2.5x3.7 | 21.5 | ||
YY(Q)W-6000 | 6000 | 325 | 580 | 700 | 6.2 | 7.8x3.0x3.8 | 25 | ||
YY(Q)W-7000 | 7000 | 410 | 680 | 810 | 7 | 8.2x3.0x3.8 | 27.5 | ||
YY(Q)W-10000 | 10000 | 520 | 970 | 1160 | 10.5 | 10x3.5x4.0 | 32 | ||
Notes: Parameter is for reference only, If any changes should follow actual drawings. |
Gas Oil fired thermal boiler oil heating system
Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Scope of application:
1. Chemical industry - oleochemical, polymerization industry, reaction tank, distillation, concentration.
2, plastic industry - plastic guns, extrusion stereotypes.
3, textile industry - resin setting machine, dyeing machine, drying room, high temperature machine, roller machine.
4, the rubber industry - rubber vulcanization heating.
5, food industry - cooking, drying, vegetable oil refining.
6. Forest industry--heating and setting of splint, Pauli board and fiberboard.
7, paper industry - multi-layer cardboard packaging, drying, drying.
8. Others - heating of metal plating bath, paint condensation, drying, distillation, reduction, concentration, dehydration, and melting of asphalt in the pharmaceutical industry.
After-sale Service
1), 100%safety, running stably, excellent water level and pressure control, fully automatic operation
2), Boiler running life > 20years.
3), Good after-sale service. It is free for you to get the damaged spares in warranty period(1 year) if there is any questions. Assure that we can supply you spares in boiler’s all life.
4), We can arrange engineer to your company for installation and commissioning and training. If you need us at any time, we can send our technicians and prepare in a short time.
5), Special paint is used after assembly. Paint is particularly used in your climate area, which is anti-corrosion, anti-abrasion and color-fastness.
1. 100%safety, running stably, excellent water level and pressure control, fully automatic